Bitumen-polymer Primer TECHNONICOL № 03
Bitumen-polymer Primer TECHNONICOL № 03 is a blend of oil bitumen, polymers and adhesion additives in organic solvents. It has a high penetration ability and short drying time.
The primer is designed for surface treatment of steel orthotropic plate spans of bridges before laying the protective bonding layer, for the treatment of the surface of concrete roadway plate spans of bridges before installation of waterproofing layer, as well as for treatment of other structural surfaces before laying the waterproofing.
Primer consumption —0.25 –0.35 l/m2.
- Dry residue, in the range of: 25-30%
- Drying time, at most: 10 min.
- Relative viscosity, in the range of: 10-30 s
According to the “General Guidelines for design and construction of roofs of bitumen-polymer fusing materials TechnoNIСOL Corporation” and the “Guidelines for the waterproofing of underground structures TechnoNIСOL Corporation”.
Temperature range from -20°С up to +40°С. At temperature below +5°С keep material in a warm place for at least 24 hours.
Drying time under standard conditions is not more than 10 minutes.
Do not use near open flame. Work in well-ventilated areas. Avoid contact with skin and eyes.
Keep in a dry place, away from the sun light at the temperature from -20°С to +30°С.
Guaranteed shelf life – 12 months.
|PRIMER No. 3||20l ( bucket )|